Differences

This shows you the differences between two versions of the page.

--- version_history [2016/09/18 12:16]
admin
+++ version_history [2025/07/20 21:33] (current)
@@ Line 1: / Line 1: @@
+=== 6.1.0 Beta (10/10/2016) ===
+  * New: Support for Custom Attributes overwriting existing attribute
+=== 6.0.1 Beta (9/18/2016) ===
+  * New: IPv6 support
+  * New: Rewritten the Socket Server
+  * New: Performance improvements
+=== 5.7.2 (12/03/2013) ===
+  * Fix: Added more error handling for the Installer
 === 5.7.1 (11/17/2013) ===
@@ Line 49: / Line 60: @@
 === 5.0.0 (06/23/2009) ===
-New:
+  * New: Completely rewritten from scratch for .net 2.0
-New:
+  * New: Allows multiple listeners
+  * New: Allows VoIP and non-VoIP calls at the same time
+=== 4.0.0 (01/31/2009) ===
+  * New: Added Performance Counters
+  * New: Added more control on Packet Log
+  * Note: Packet Log is now only controlled by the config file
+=== 3.9.8 (04/01/2008) ===
+  * New: Can now specify Service Duration in Minutes, Hours and Days
+  * New: Resolved a memory leak issue in VoIP mode
+  * Note: Make sure you upgrade the database at setup time
+=== 3.9.5 (05/05/2007) ===
+  * New: Supports SIP Digest Authentication for YATE VoIP server
+  * New: Allows selection of h323-call-origin and h323-call-type to determine which Accounting packets will be used to calculate call time for VoIP calls
+  * New: Improvements in test tool
+=== 3.9.4 (11/01/2006) ===
+  * New: Can activate an account after the first successful login
+=== 3.9.0 (09/05/2006) ===
+  * New: supports Non-ASCII characters in User Name and Password (only PAP and MS-CHAP 1)
+  * New: It will store the Called-Station-Id in the Usage table, if it exists in the Accounting-Stop packets
+  * New: Allows Password verification in VoIP mode
+  * New: Has been tested with Epygi VoIP equipment
+  * New: Supports Disconnect-Message
+  * Note: This version uses a new licensing mechanism
+  * Note: Make sure you upgrade the database at setup time
+=== 3.6.0 (02/01/2006) ===
+  * New: Calling-Station-Id will be logged in Usage table (if present in Accounting-Stop packet)
+=== 3.5.9 (11/03/2005) ===
+  * New: Q931 Disconnect Causes for completed calls can be specified
+  * Fix: Some issues with VoIP accounting were fixed
+  * Note: Make sure you upgrade the database at setup time
+  * Always make backups!
+=== 3.5.1 (10/08/2005) ===
+  * New: Supports "Maintenance Fee and Connection Fee"
+  * Fix: An issue with Customers page was fixed
+  * Note: Make sure you upgrade the database at setup time
+=== 3.4.0 (09/26/2005) ===
+  * New: Supports "First Call Fee"
+  * Fix: An issue with date/time in previous build fixed
+  * Note: Make sure you upgrade the database at setup time
+=== 3.3.0 (09/25/2005) ===
+  * New: Successfully tested with Cisco and Quintum VoIP equipment
+  * Note: Let install program update your database
+=== 3.1.0 (07/24/2005) ===
+  * New: Packet log now logs Interim Accounting packets also
+  * Fix: Database upgrade program was modified to increase timeout value
+  * Note: IBusiness programming interface has changed. See [[using_api|Using API]]
+  * Note: Let install program update your database
+=== 3.0.0 (02/19/2005) ===
+  * New: Packet Log feature lets you log any attribute you need
+  * Note: Let install program update your database
+=== 2.6.2 (01/23/2005) ===
+  * Fix: Will not crash because of a full Event Log
+=== 2.5.1751 (10/17/2004) ===
+  * New: Surcharges for service fees
+  * New: Will retry to start the service if it fails at start
+  * Fix: More error handling
+  * Note: Let install program update your database
+=== 2.4.1562 (04/11/2004) ===
+  * New: Support for IP Address Pool
+  * Note: Let install program update your database
+=== 2.3.1547 (03/27/2004) ===
+  * Optimization: Now it runs %10 faster
+  * Fix: A bug in "database install" introduced in build 2.3.1527 was fixed
+=== 2.3.1527 (03/07/2004) ===
+  * New: Email Notifications
+  * Note: Make sure update the database when installing this version
+=== 2.2.1519 (02/28/2004) ===
+  * New: Conditional Custom Attributes
+  * Note: Make sure update the database when installing this version
+=== 2.1.1515 (02/24/2004) ===
+  * New: Accepts "*" Wildcard as part of RADIUS Client IP
+=== 2.1.1507 (02/16/2004) ===
+  * New: Primary and Secondary periods for each service
+  * Fix: Restored compatibility with SQL server 7.0
+=== 2.0.1485 (01/25/2004) ===
+  * New: Web Based configuration is enabled by default
+  * New: Saves a copy of the Error Log information in database
+  * Note: Only supports .net framework 1.1
+=== 1.7.1426.23936 (11/27/03) ===
+  * New: Version number is added to the Log file
+  * Fix: If the Service is disabled, the Customer will not be able to login
+  * Fix: Session-Timeout is only sent for prepaid Services
+=== 1.7.1407.21293 (11/8/2003) ===
+  * New: A switch is added to config file to change the time calculation precision between Minutes and Seconds
+=== 1.7.1401.23401 (11/2/2003) ===
+  * New: One new field (Middle Name) is added to Customers table
+=== 1.7.1387.22199 (10/19/2003) ===
+  * Fix: Non-standard VSAs with Vendor type numbers greater than 255 which were causing the software to not respond are now ignored
+=== 1.7.1359.25557 (09/21/2003) ===
+  * New: Updated to support Simplified Business DLL
+=== 1.7.1354.35911 (09/16/2003) ===
+  * Fix: White spaces before and after User-Name will be igno
+=== 1.7.1351.27519 (09/13/2003) ===
+  * New: Custom Attributes can be defined for Customers. (In addition to Services)
+=== 1.7.1344.20497 (09/06/2003) ===
+  * New: Support for Logger DLL
+=== 1.7.1327.39377 (08/13/2003) ===
+  * New: it now sends the Session-Timeout attribute if Service is prepaid and there is a per minute charge
+=== 1.7.1318.25074 (08/10/2003) ===
+  * New: More options on Proxy forwarding
+=== 1.7.1305.23753 (07/29/03) ===
+  * New: Supports Cisco prepaid VoIP service
+=== 1.5.1272.25559 (06/26/2003) ===
+  * New: EAP-TLS support (beta)
+  * New: MPPE Encryption support
+  * New: Custom Attribute support
+  * Fix: A minor bug with CHAP authentication is fixed
+=== 1.0.1224.18021 (05/09/2003) ===
+  * New: Now you can test the software for 30 days without registering it
+=== 1.0.1214.39563 (04/29/2003) ===
+  * Fix: Bug related to forwarding EAP-TLS packets (proxy mode)
+  * Fix: More advanced error handling and event logging
+=== 1.0.1209.14147 (04/24/2003) ===
+  * New: Configuration settings can be changed using API
+  * New: Authentication protocols can be enabled or disabled in config file
+=== 1.0.1196.17745 (04/11/2003) ===
+  * New: List of client IPs and Secrets can be loaded using API
+=== 1.0.1194.27086 (04/09/2003) ===
+  * New: API is ready for use
+=== 1.0.1194.13353 (04/09/2003) ===
+  * Fix: License file is moved from System32 folder to Evolynx RADIUS Application folder
+=== V 1.0 B1.9 (04/08/03) ===
+  * New: SQL server 7 is also supported
+=== V 1.0 B1.8 (04/02/2003) ===
+  * New: Ability to accept commands from Evolynx Server Controller
+=== V 1.0 B1.7 (03/19/2003) ===
+  * New: Proxy (Forwarding) operation
+=== V 1.0 B1.6 (03/17/03) ===
+  * New: Support for a RADIUS Dictionary file. This feature is necessary for Proxy and API
+  * Known Issue: Above feature caused performance decreased by 20%
+=== V 1.0 B1.5 (03/10/03) ===
+  * New: Support for SQL server Port numbers is added to Install program
+=== V 1.0 B1.4 (03/09/2003) ===
+  * New: RADIUS Client information is no longer stored in SQL server
+=== V 1.0 B1.3 (03/08/2003) ===
+  * New: Can be used as a remote server for RADIUS Proxy servers
+=== V 1.0 B1.2 (03/05/2003) ===
+  * New: Can log details about rejected or discarded packets
+=== V 1.0 B1.1 (02/28/2003) ===
+  * Fix: Improvements in database installation
+=== V 1.0 B1.0 (02/26/2003) ===
+  * First Beta ready for download

Evolynx

User Tools

Site Tools

Differences

Page Tools